Stitch and glue is a simple boat building method which uses plywood panels stitched together, usually with copper wire, and glued together with epoxy resin. this type of construction can eliminate much of the need for frames or ribs. [1]. Stitch and glue boat building with marine epoxy, fiberglass cloth, and plywood getting started find basic no blush marine epoxy, aluthane (tm), wet dry 700 (tm) epoxy putty, and fiberglass - 3 inch and 4 inch by 50 yards, fillers and thickeners in our marine catalog.. The “stitch-and-glue” construction method is the easiest way to build a boat, as tens of thousands of amateur boatbuilders will testify. the approach, which emphasizes the use of epoxy adhesives and strategic fiberglass reinforcement combined with marine plywood, is ideal for first-timers..
Stitching. basically, stitch and glue boats are constructed by gluing panels of plywood together using epoxy resin and fiberglass. the stitching is used to hold the panels in place while the glue is applied and allowed to cure.. A stitch and glue boat hull is made of plywood panels assembled with fiberglass tape. contrary to traditional boat building in which molds define the hull shape, in stitch and glue, the hull panels define the shape .. Basic "stitch-and-glue" manual this manual describes the building of a small boat by the "stitch-and-glue" method, also known as "taped seams". the method originated in england in the early 60's and the first boat built was joining plywood sheets almost any boat you build from plywood will require panels longer than 8' except some very.
